What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 04:19

Edit 2024–10.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
In schematic diagrams this is the symbol for a fuse:
Why didn’t Obito confront Kakashi after he witnessed him kill Rin?
2024–10–16 [ OO OLAOYE OYEBODE ]
It also is a device that limits the change in current flow.
2024–10–10[John johnson John Johnson ]
Lululemon Stock Plummets 22% in Late Trading on Cut Guidance. Tariffs Are to Blame. - Barron's
The third is lightning and “how it gets conducted into a home.”
He then describes Rainy Season and Lightning.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
The MOV will conduct when the voltage exceeds 50% of line voltage.
The bolt then partially travels down the line to your home.
Cole? Kyle? Whatever the name, M's thrilled to see Young arrive in majors - The Seattle Times
This is where this question deviates from being a 'generic' question, and becomes more specific.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
What's it like to have an IQ of 140 to 170? Do people notice you're different?
But… the neutral is now “floating” because of the 1 ohm resistance.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Upcoming temporary full closure of South Academy Boulevard for widening project - KKTV
Because the load is inductive, the current lags the voltage.(by a bit).
A fuse is a non-resetable over current circuit protector.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Which scene is considered the most difficult to watch in each of Quentin Tarantino's movies?
a photo is worth a thousand words.
These are simplified answers to the original question, and does not change anything I wrote above.
Here is a simplified AC power diagram.
As measles spreads across the Americas, outbreaks in Mexico and Canada have also turned deadly - CNN
There are three different concepts here that are getting confused.
The other is “what does a “fuse” do?”
He then describes the function of a fuse.
How was your JEE Mains 2024 April attempt?
An AC voltage/ current source, and an ac inductive load.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
What is your craziest college sex story?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is where the MOV conducts again, and dissipated the energy.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
nine
I post the exact comment here.
Pocket is shutting down, so I switched to a self-hosted alternative - Android Authority
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
[image of Common-mode choke]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Upvotes:
For this case there are devices called Metal oxide varistors (MOV).
So, the voltage could go up to 500 volts, and the fuse will not open up.
What does a fuse do?
(Dc diagram shown, AC is similar).
These devices are installed between the “hot” and “neutral” and protective ground.
[old diagram got deleted by accident]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At one ohm, the resistor has a maximum of 1 watt power.
Barnstars:
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
so, what happens?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
the problem then depends on "how fast does the fuse operate?".
This is 'the assistant's answer'
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But it can get overloaded, and no longer works.
Now when you have a certain ac resistance, then a current flows in a loop.
but I think this circuit , shows a few more pieces.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
There are two important concepts here.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
what exactly is a ‘surge’ protector?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then asserts :
This device then solves the entire problem.
eight
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What is lightning?
2024–10–14 [Omar Gharbi Omar Gharbi ]
First Sentence:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
One
It seems Mohan does not understand the difference between a comment and an Answer.
but this device (an Inductor) … impedes the rapid changes in the current.
This one hit behind the barn.
One is “what exactly is in a ‘surge protector’ ? ”
At least they know the answer if they wanted it.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
A circuit breaker is similar, but is resettable.